How to make a DIY pallet bench

147801 Views
Published At : 17 Mar 2017
1416   89
Share :


Watch Full Video Of How to make a DIY pallet bench.How to build a pallet bench using recycled pallet wood. This upcycled pallet project can be used as both an indoor bench and outdoor bench. If you would like to build some pallet furniture this wood bench project is an easy project for beginners. Tools you used in this project: Drill: https://goo.gl/xJfx9b Drill Bit Set: https://goo.gl/gEc6QK Set Square: https://goo.gl/VutnAKhttps://goo.gl/VutnAK Clamps: https://goo.gl/kAsE8R Hand Saw: https://goo.gl/pwRg7I Mitre Saw: https://goo.gl/KYEV4B Hole Saw: https://goo.gl/T8YL3P Tape Measure:
https://goo.gl/kIl5dT Screws Glue SUBSCRIBE: https://www.youtube.com/channel/UCjO0gG2A5ki2n7HNZD0Sv7A?sub_confirmation=1 INSTAGRAM: https://www.instagram.com/silverline_tools/ TWITTER: https://twitter.com/SilverlineTools FACEBOOK: https://www.facebook.com/SilverlineTo... BUY THE TOOLS: http://www.silverlinetools.com Stages of this project: 1. Dismantle your pallet (https://www.youtube.com/watch?v=gPi0zDsqJUo) 2. Decide the height and length of your bench and cut a kit of parts. This projects uses 8 lengths and 16 legs. 3. Join the legs and lengths using glue and screws.
Use a set square to ensure the corners are square. 4. Cut lengths to fill in the outside gaps. Fix onto bench with glue and screws. 5. Sand the bench to remove rough surfaces. 6. Secure bench legs using off-cut between your leg pieces. Circular pieces made with a hole saw look good. Glue into place and clamp until dry. Silverline Tools How To videos are for reference purposes only. Undertaking these projects is entirely at your own risk. Read safety instructions before operating any power tools and always wear appropriate protection.